Solgol

Log Splitters – Kindling Cracker Firewood Kindling Splitter. Appreciate browsing this blog. For anyone who is trying to find the best Log Splitters products and reputable, we recommend Kindling Cracker Firewood Kindling Splitter as the right option for you to have an inexpensive rate and excellent quality.

You’d think that kindling is a pretty simple product, yet there are a surprising number of ways to make it, including an axe, pole splitter, hinged splitter, and kindling splitter.

Northern Tool Kindling Cracker Video

Axe

If you’re comfortable using one, an axe is a fast and easy way to cut kindling. It’s also a versatile tool. Other types of kindling splitters are single-purpose tools, but an axe can be used for all kinds of woodland cutting, trimming, and splitting tasks. You can also take it with you when you go hiking or camping.

If you’re choosing an axe, a length of between 12 and 18 inches should give you sufficient leverage and good balance without being too heavy. If you want a multi-purpose tool, a handle at the shorter end of that range is easier to carry around. You don’t need a large axe-head to split kindling.

Price: You can buy a cheap axe for a few bucks, but you’ll probably end up disappointed by the quality. The blade, in particular, tends to be poor and need frequent sharpening. A high-quality axe costs $30 to $45, but it should last a lifetime.

Pole splitter

A pole splitter is a bit like an axe-head fixed on a vertical pole. It takes a couple of minutes to set up, but once fixed, you simply slide the blade up and down the pole. It offers more accuracy for the inexperienced woodcutter, but sometimes you still have to put your hand in the path of the blade. There are several different components, which some people find overly complicated.

With pole splitters, think about overall construction and materials. These devices can be lightweight, which makes them fairly easy to move around, but they aren’t as robust as other options. Pole splitters usually have a recommended maximum log size, so check that, too.

Price: The few sliding pole splitters we found are similar in price to the best manual models, at just under $100.

Hinged splitter

A hinged splitter is a backing plate with a long, lever-like blade that’s hinged at one end. The principle is similar to a guillotine-like paper cutter. The device is fixed to a convenient vertical surface, such as a wall or post, you rest the log against the back plate, and push the blade down and through. It’s quite safe because you’re splitting away from you, but it does rely on arm strength to split the kindling, which might be a challenge for some.

Price: You can find wall-mounted cast iron hinged splitters for $150 to $200.

Kindling splitter​​​​​​​

Instead of taking the cutting edge to the log, a kindling splitter hammers the log down onto a blade.

Material: Kindling splitters are made from either steel or cast iron. Some of the latter are quite decorative in design. The most basic models are made of a simple upright sheet of steel welded at a right angle to a stand.

Blade: The blade doesn’t have to be razor sharp to be effective because the applied force splits the wood grain quite easily. More advanced blades are contoured to split the log into numerous pieces of kindling with one blow. Most blades are cast as part of the structure. We have also seen removable blades made from a mixture of steel and titanium. These are very hard and take a good edge, which helps if you have particularly dense wood to split. Normally, that’s not an issue, and the fixed-blade type is more than adequate.

Kindling Cracker Xl

Hoop: A hoop around the top of the kindling splitter means you seldom, if ever, have to hold the log you’re striking. These tools are simple and efficient. The most important dimension to check is the diameter of the hoop because that’s going to define the maximum size of log you can split. This diameter varies from about six to nine inches.

Weight: While tool weight is sometimes seen as a disadvantage, it’s unlikely you’ll be moving your kindling splitter around very often, so in this case it usually means a more robust casting – and that’s never a bad thing.

Holes: For added stability in use, it’s nice if the base is has pre-drilled holes to allow the kindling splitter to be bolted down.

Price: Manual kindling splitters of the type we’ve focused on here start at around $40 for a welded metal device that’s little more than a sturdy upright blade, and run to around $120 for the highest-quality cast iron tools.

The design is very simple but effective, I got inspiration from pictures I saw online.

Frame:

• Make an 8' square from the two 8' pieces and two 7 1/16' pieces of rebar, do this twice so there are two squares;
• Tack weld the squares to hold;
• Using the welding magnets, line up the 12' rebar perpendicular to one side of one of the squares and then tack weld in place;
• Repeat on the other side;
• Weld on the second square that will be the top of the cage.

Blade:

• The blade is made from a piece of 7 3/4' x 1.5' x 1/4' thick steel plate cut into a semi-circle like the head of an axe;
• The blade is welded to a 7 1/16' piece rebar;
• An edge was ground into the plate steel using an angle grinder and a grinding disc or sanding flap disc, it doesn't have to be super sharp, just sharp enough so it will split wood.

Assembly:

• The blade assembly was welded mid way between the two vertical 12' rebar pieces, this keeps the blade high enough so when the wood splits there is room for the wood to go and keeps you from striking the top of the cage with the handle of the hammer;
• Using the 5' rebar pieces, they were ground with an angle so they could be welded between the bottom square and vertical 12' rebar as support bars;
• All the welds were reinforced with additional welding before use.